Cat Cave #1 is Moving Along

 

The gravel and mulch have been picked up at the local hardware stores.  The plan is to put gravel around the base of the inside of the fence, just in case we have any little critters that might want to try and dig their way out!  The mulch is to become a large “cat litter pan”.  We will see how that works out.  Should be cheaper than wheat cat litter!

 On my way out to check progress, I saw Andy sitting in the garage window.  As I passed by he asked me when we were going to have his Cat Cave ready!  He poses behind heavy duty wire screen that Gordon had to install because they kept ripping the regular screens whenever they felt we weren’t letting them out frequently enough!
 

The cage is roughly shaped like the crude diagram below.

3 car garage                                                   Cat Door will go here - >                                               To allow them access to                                                                          Shelter	| 4’W x 7’H|        Gate               <-----------  24’ Wide	^ | | |              East -------------------------> | | | | 73’ long
Work Shop	Outdoor         Cat Cage #1	| | | | | | | | | |
	|  Bamboo          |                          |        6'w x 8'H      Sunny Area    |           Gate                          |

Zach Woodfin, helper extraordinaire, came over at 8 a.m. both mornings this weekend to help Gordon!   It was cold when they started each day … just above freezing temperatures and no sunshine!

Gordon and Zach have installed cross bracing and wire above where the two gates will go.   Here is the beginning of the 4x7 gate at the North end.  They also had to install a small support vertical beam because the farm fencing needed more support along the span. 

Here is how the South end with the 6 x 8 gate is coming along.  The bigger gate is needed to get the riding mower in there if needed.